An automated system for pH measurements at AVR
Efficient measurement with Liquiline CDC90
AVR Waste in Botlek, Rotterdam, processes up to 1.7 million tons of residual waste per year. The waste is converted into raw materials and energy using a wide range of processes, which involve a lot of monitoring and regulation.
Results
-
Strong reduction of maintenance effort with improved work safety
-
Optimizing the yield and quality of the process
-
Ability to control measurement points remotely via any process control system or mobile device
The challenge
Kooijmans says “With our processes –particularly water treatment – you get lots of scaling, a big build-up of scale that causes the sensors to get stuck in the fixtures. In practice, 99% of our consumption is purely due to (sensors) breakages when changing . They break off or fall while being handled. Some 18,000 man hours are involved in total!”
Savings for the company
To bring down the consumption of pH sensors and automate the process of calibration and cleaning, a fully automated system, the Liquiline Control CDC90, was installed.Kooijmans says “Now, alternating pH sensors are cleaned every four hours. Before, we had to replace a sensor every two days, now it’s only once every eight months. So, we save a lot of man hours and are saved from what is just a messy job. The quality of the water treatment has improved too, which is an unbelievably big win.”
FLEX产品选型 | 仪表技术性能 | 选型便捷程度 |
---|---|---|
Fundamental选型 完美胜任基本测量任务 |
仪表技术性能
|
选型便捷程度
|
Lean选型 轻松应对关键工艺的测量挑战 |
仪表技术性能
|
选型便捷程度
|
Extended选型 创新技术助力工艺流程优化 |
仪表技术性能
|
选型便捷程度
|
Xpert选型 满足严苛工况的特殊测量要求 |
仪表技术性能
|
选型便捷程度
特殊选型 |