该产品在该地区不可用。
如有任何疑问，请联系您的Endress+Hauser销售合作伙伴。
应用领域
Flowfit COA30 is an efficient tool for calibrating your oxygen sensors. The sensors can be quickly and easily installed in the flow cell and calibrated using test gases – precisely tailored to your specific measurement requirements. Flowfit COA30 is lightweight and portable, making it ready for immediate use anywhere. By using it to calibrate oxygen sensors, you increase the reliability of your measurement point and ensure smooth processes.
Flowfit COA30 is used in various industries and applications where precise and efficient calibration of oxygen sensors is required, such as:
Power & Energy:
- Water and steam cycles
Life Sciences:
- Fermentation processes
Food & Beverage:
- Preparation
- Filling
- Storage
Chemical:
- Inertization
优势
Precise calibration of your oxygen sensors with test gases: Flowfit COA30 enables precise calibration of your oxygen sensors, perfectly tailored to the requirements of the respective measuring point.
Easy calibration of oxygen sensors: Install the sensor in the flow cell, connect it to the transmitter, attach the appropriate test gas, calibrate – done.
Time savings in zero point calibration: Compared to traditional calibration methods with sodium sulfite or zero-point gel, Flowfit COA30 offers significantly faster calibration.
No sensor cleaning required: After calibration with Flowfit COA30, there are no residues on the sensor. Since calibration is done with test gases (e.g., nitrogen), no subsequent cleaning is necessary.
Compatible with various sensor sizes: Flowfit COA30 is suitable for 12 mm oxygen sensors with a length of 120 mm to 360 mm and a PG13.5 thread, covering a wide range of applications.
成功案例
| FLEX产品选型 | 仪表技术性能 | 选型便捷程度 |
|---|---|---|
Fundamental选型 完美胜任基本测量任务 |
仪表技术性能
|
选型便捷程度
|
Lean选型 轻松应对关键工艺的测量挑战 |
仪表技术性能
|
选型便捷程度
|
Extended选型 创新技术助力工艺流程优化 |
仪表技术性能
|
选型便捷程度
|
Xpert选型 满足严苛工况的特殊测量要求 |
仪表技术性能
|
选型便捷程度
特殊选型 |
-
-
《技术资料》（TI）
TI Flowfit COA30
流通池，适用于标定长度为120...360 mm、直径为12 mm的溶解氧传感器
EN ZH 23/05/2025语言:
中文
版本:
23/05/2025
文件大小:
1.6 MB
文件名:
TI01824CZH_0125-00.pdf
-
-
-
《操作手册》（BA）
BA Flowfit COA30
流通池，适用于标定长度为120...360 mm、直径为12 mm的溶解氧传感器
EN ZH 23/05/2025语言:
中文
版本:
23/05/2025
文件大小:
2.7 MB
文件名:
BA02485CZH_0125-00.pdf
-
-
-
《安装指南》（EA）
EA Flowfit COA30
For the maintenance of the COA30 assembly
EN ZH 05/06/2025语言:
英语
版本:
05/06/2025
文件大小:
589.7 KB
文件名:
EA01607CEN_0125-00.pdf
-
-
-
《安装指南》（EA）
EA Flowfit COA30
For replacing the seal of the COA30
EN ZH 06/06/2025语言:
英语
版本:
06/06/2025
文件大小:
721.8 KB
文件名:
EA01608CEN_0125-00.pdf
-
-
-
制造商声明
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02055_01.25
Manufacturer specification: PEDEN ZH 22/04/2025语言:
英语
版本:
22/04/2025
文件大小:
264.6 KB
文件名:
HE_02055_01.25 COA30_11_DGRL_.pdf
-
-
-
制造商声明
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02166_01.25
Manufacturer specification: RoHS语言:
德语
版本:
23/06/2025
文件大小:
262.6 KB
文件名:
HE_02166_01.25_COA30.pdf
-
-
-
制造商声明
Product family: Flowfit
Product root: COA30-
Declaration number: HE_02066_01.25
Manufacturer specification: PEDEN ZH 22/04/2025语言:
英语
版本:
22/04/2025
文件大小:
265.5 KB
文件名:
HE_02066_01.25 COA30_12_DGRL_.pdf
-
